Simple Aeroponics System
Simpler approach to aeroponics by avoiding solenoids and pressure tanks. Have run a mistking for 5+ years with no failures. The downsides; rougher on high pressure pump and does drip a little after spray. Limit nozzles to 20 or so max to avoid pressure drop.
BOM
Netcups
Airstones and line
You typically want to run a airstone for the nutrient tank
Buckets
Can be anything really, square shape is nicer for fittings
Fittings and line:
Filter for sediment
Larger tote for nutrient tank
Must be a strong tote / rigid to hold nute solution without bowing
Pumps
Be sure to get the one with repeat cycle timer in options
https://www.mistking.com/Starter-Misting-System-v5.0.html
Nozzles
Lots of choices; but to get a general idea.
Brass nozzles breakdown and clog after a couple of months.
Stainless does much better overall; but requires a fitting
The plastic ones require some gluing right into 1/4 inch line and seem to do better then brass
stainless replacement (nozzle only)
Tools
2-4 inch hole saw (pending net cup size)
Step drill bit
marine weld epoxy (2 bottles)
Tubing cutter
electrician gel or other benign substance for connectors
Pictures
Buy me a coffee here (all donations will go back into garden!) https://www.buymeacoffee.com/jasoncae